Laser beta lasermike LS8000-3 Manuale Utente
LaserSpeed 8000-3 Instruction Handbook
Ethernet Communication
Part No. 93463 / Drawing No. 0921-01561
Page 177 of 221
Revision A (Sep 2007)
Identifier
Value
Response Length (Bytes)
0
Blank
0 – These id's are ignored
1 IP
Address
4
2
Ethernet Hardware ID
6
3
DHCP Enabled/Disabled
1 (either 1 or 0)
4
Gauge Model
Varies (Text String)
5
Serial Number
Varies (Text String)
6
Host Name
Varies (Text String)
7
Boot Loader Revision
Varies (Text String)
8
Software Revision
Varies (Text String)
9
Firmware Revision
Varies (Text String)
10
Web Server Revision
Varies (Text String)
others Reserved
Discovery Beacon Response Format
Protocol: UDP Broadcast
Source Port: 10003
Destination Port: Same as Discovery Beacon
The device response format is a UDP message to the same port from which
the discovery beacon originated. The response consists of a version string,
followed by a list of values in response to the list identifiers in the beacon
message. Each response consists of three parts: the identifier, the length of
the value (in bytes), and the value. This sequence is repeated for each value.
the discovery beacon originated. The response consists of a version string,
followed by a list of values in response to the list identifiers in the beacon
message. Each response consists of three parts: the identifier, the length of
the value (in bytes), and the value. This sequence is repeated for each value.
The last byte of the value is followed immediately by the next identifier.
Identifier bytes that are 0 are padding, and should be ignored.
Identifier bytes that are 0 are padding, and should be ignored.