Lanner electronic FW-7650 Manuale Utente

 

There are four selections for Power Management, three of which have fixed mode 
setting 

Disable (Default) 

No power management.  Disables all four modes. 

Min. Power Saving 

Minimum power management.  Doze Mode=1hr. Standby Mode =1hr., Suspend 
Mode=1hr., and HDD Power Down=15min. 

Max. Power Saving 

Maximum power management. –Only available for SL CPU’s. Doze 
Mode=1min., Standby Mode=1min., Suspend Mode=1min., and HDD Power 
Down=1min. 

User Defined 

Allows you to set each mode individually.  When not disabled, each of the ranges 
are from 1 min. to 1 hr. except for HDD Power Down which ranges from 1 min. to 
15 min. and disabled. 

 This option is for choosing the setting in which the monitor 

will turn off.  The default setting is “Suspend” 

N/A 

Always turn on. 

Doze 

During Doze mode, the monitor will be turned off. 

Standby  During Standby mode, the monitor will be turned off. 

Suspend  During Suspend mode, the monitor will be turned off. 

 This determines the manner in which the monitor is blanked.  

The default setting is “V/H SYNC+Blank”. 

V/H SYNC+Blank  This selection will cause the system to turn off the vertical and horizontal 

synchronization ports and write blank to the video buffer. 

Blank Screen 

This option only writes blanks to the video buffer. 

DPMS  

Initial display power management signaling. 

Option are from “1 Min” to “1 Hour” and “Disable”. The CPU 

clock will be stopped and the video signal will be suspended, if no Power Management 
events occur for a specified length of time. Full power function will return when a 
Wake-Up event is detected. 

 

 Options are from “1 Min”. to “15 Min”. and “Disable”.  The 

IDE hard drive will spin down if it is not accessed within a specified length of time.