Lanier 5622 Manuale Utente

Placing the Original in the Automatic Document Feeder (ADF)

35

The ADF allows you to insert several
originals at one time. Originals placed
in the ADF can be scanned on one
side or both sides.

❖

❖

❖

❖ Originals that can and cannot be

For information about the origi-
nals that can and cannot be placed
in the ADF, see the Copy Reference
manual.
Attempting to use unsuitable orig-
inals in the ADF can lead to mis-
feed and damage to the original.
Place such originals directly on the
exposure glass.

❒ When using the scanner func-

tion, the following originals also
cannot be placed in the ADF, in
addition to the restrictions that
apply when using the copier
function.
• Originals longer than the

length (432mm) of the A3/
11"x17".

❒ For information about which

original sizes can be detected
automatically and notes on
placing originals in the ADF,
see the Copy Reference manual.

A

B

Insert the originals with the side
to be scanned facing up. (For orig-
inals which are to be scanned on
both sides, the first side should
face up.)
There are two orientations. Either
orientation can be used for place-
ment.

❒ When using the network deliv-

ery scanner and Document
Server, originals with the same
width and different length can
be placed at the same time.
Place the originals as shown in
the figure below.

❒ Originals are scanned in the in-

serted order, starting with the
topmost page.

A Place the original so that the

ADF
Placement Orientation