Land Pride Saw PR1560 Manuale Utente

Section 7: Troubleshooting

PR1560 & PR1572 Powered Rakes 314-164M

Land Pride

7/14/08

Table of Contents

Section 7: Troubleshooting

Problem

Solution

Machine makes intermittent clicking
noise

Check for damaged gear and replace if necessary

Check for worn drive chain and replace if necessary

Roller will not turn

Obstruction between roller and material control deflector

Chain off

Burnt or mis-adjusted slip-clutch on driveline shaft

Broken drive spindle

Operating depth insufficient

Raise gauge wheels

Increase tractor RPM

Clean roller

Roller gouging on the end

The gauge wheel on chain case side should be approximately 1” lower than the
non-drive side gauge wheel for consistent leveling

Set gauge wheel depth

Correct air pressure in gauge wheels

Level 3-point arms on tractor

Too much dirt going into the windrow or
dirt going over the top of the material
control deflector

Reduce ground speed

Raise material control deflector

Lower gauge wheels

Too many rocks passing between
material control deflector and the roller

Lower material control deflector

Roller balling up with soil

Wait until soil dries

Powered Rake bumping on ground

Clean roller