La Crosse Technology 308-807 Manuale Utente

Pagina di 28
 
 
  P a g e
| 20  
VIEW DIFFERENT DISPLAY MODES: 
On the IR remote control, use these buttons to switch between different display modes: 
WEATHER 
WEATHER & PHOTOS 
PHOTOS 
CALENDAR 
NOTE: In Weather Mode and Weather & Photos Mode: 
  The indoor temperature/humidity will constantly switch with the outdoor temperature/humidity 
readings.   
  The daily, weekly and monthly rain will continually switch but the total rain will remain constant. 
  This switching feature cannot be turned off. 
WEATHER MODE: 
 
1)  Weather forecast 
– includes sunny, partly cloudy, cloudy, rainy & stormy 
2)  Pressure bar chart 
– shows pressure level & trend of the past 6 hours 
3)  Barometric pressure - pressure reading (refer SETUP mode for pressure unit setting) 
4)  Pressure trend 
– rising, steady or falling 
5)  Daily, weekly or monthly rainfall in inch or mm (switches continually) 
6)  Total Rainfall in inch or mm 
7)  Wind chill in degree F or C 
8)  Average wind speed in m/s, knots, mph & km/h 
9)  16 resolution of average wind direction 
10) Gust wind speed in m/s, knots, mph & km/h 
11) Outdoor or indoor temperature in degree C or F (with trend 
– rising, steady or falling) (switches 
continually) 
12) Outdoor or indoor humidity (with trend 
– rising, steady or falling) (switches continually) 
13) RF signal indicator 
– flashes when it is searching for RF signal from remote sensor; stays on when it 
has successfully received RF signal from the remote sensor 
14) Clock 
– displays in 24 or 12 hour format (refer “Time format” in SETUP mode for setting) 
15) Alarm icon 
– appears when alarm is enabled 
16) Moon phase with stars icons 
– New moon (the moon icon disappears), Waxing Crescent moon, First 
Quarter Moon, Waxing gibbous moon, Full Moon, Waning gibbous Moon, Last Quarter Moon & 
Waning Crescent Moon 
17) Calendar 
– displays in Day/Month or Month/Day format (Refer SETUP mode for setting)  
18) Channel number of outdoor remote sensor 
– channel 1, 2 or 3 (Default channel 1 for wind meter)