Manualsbrain.com
  1. Manuali
  2. Marche
  3. Infortrend
  4. EONSTOR A16E-G2130-4
  5. Manuale Utente

Infortrend EONSTOR A16E-G2130-4 Manuale Utente

Scarica
Pagina di 98
EonStor A16E-G2130-4 Installation and Hardware Reference Manual  
1.2.1 Drive 
Trays 
 
Figure 1-6: Drive Tray Front View 
PN: IFT-9273CDTray  
The A16E-G2130-4 subsystem comes with sixteen (16) drive trays (see 
Figure 1-6) designed to accommodate separately purchased, standard 1-inch 
pitch, 3.5-inch SATA-II disk drives. The drive bays are accessible from the 
enclosure front panel. Two (2) LEDs on the front bezel indicate the 
operating statuses. A key-lock on each drive tray secures the hard drive in 
place, while a release button enables fast retrieval of a hard drive. 
 WARNING! 
Be careful not to warp, twist, or contort the drive tray in any way (e.g., by 
dropping it or resting heavy objects on it). The drive tray has been 
customized to fit into the drive bays of the subsystem. If the drive bay 
superstructure is deformed or altered, the drive trays may not fit into the 
drive bays. 
 
 
1.2.2 
The RAID Controller Module 
PN: 
IFT-83AE21GE164 (without DDR RAM) 
 
IFT-83AE21GE1645 (with 512MB DDR RAM) 
The default size for the DDR RAID controller module is 512MB. RAID 
controller module contains a main circuit board, a preinstalled 512MB 
capacity or above DDR RAM DIMM module, and the controller module 
interfaces. The controller module contains no user-serviceable components. 
Except when installing/upgrading the cache memory inside, the controller 
module should never be removed or opened. 
 WARNING! 
Although the RAID controller can be removed, the only time you should 
touch the controller itself is to install the memory modules. The RAID 
controller is built of sensitive components and unnecessary tampering can 
damage the controller. 
 
              
                                                    Subsystem Components 
1-6