IMC Networks Wireless Outdoor Bridge XI-1500-IH Manuale Utente

 

 

This section introduces you how to configuration TCP/IP protocol into your personal 

computer. And suppose you have been successfully installed one network card on your personal 
computer. 

 
Windows 98/Me 
1、Click the Start button, select Settings, then select Control Panel 
2、Double-click the Network Icon 
3、In the configuration tab, select the TCP/IP protocol line that is associated with your 

network card/adapter. If there is no TCP/IP line listed, you will need to first install the TCP/IP 
protocol. 

4、Click the Properties button, then choose the IP Address tab. Select Specify an IP address. 
5、enter an ip address in the ip field, within the range of 192.168.1.X(X can’t be 1). 
6、After clicking OK, windows might ask you to restart the PC. Click Yes. 

 

 
Windows 2000/XP 
1、click start, settings, then click control panel. 
2、right-click the network icon and select open to open the network connections dialog. 
3、right-click the appropriate LAN connection and click properties to open the properties 

dialog for the connection: 

4、check the box next to Internet Protocol (TCP/IP) and click properties. 
5、in the TCP/IP Properties dialog box, click the radio button next to use the following ip 

address. 

6、enter an IP address in the IP field, within the range of 192.168.1.X(X can’t be 1). 

 

 

6