IGo Direct Stowaway Bluetooth Keyboard Manuale Utente

 
4.  You will be prompted for a passkey and will see 

a Bluetooth Passkey dialog box. Enter a 
passkey of your own choosing (of 1-9 digits) 
using the mobile device’s on-screen keyboard 
and tap OK. Then, type the same passkey 
number on the Stowaway keyboard, using 
<

Left Fn

> + <Number> keys. When finished, 

press the <Enter> key. 

 

 

     

NOTE: The passkey must contain only digits, 
for example 111. 

 
 
 
 
 

 

 
 
5.  If the passkey is not entered correctly, the 

connection will fail. In this case you will need 
to repeat steps 1-4 from above.  

    

NOTE: Please, make sure that the passkey is 
entered on-screen first, tap OK and then follow 
with the passkey on the keyboard. When 
finished, press the <Enter> key on the 
keyboard. 

 
 
 

 
 
 
 
6.  The keyboard is now paired and available for 

use. If the keyboard is closed, the mobile 
device is turned off or either is idle too long the 
connection will be broken. To reconnect, make 
sure both devices are powered on and within 
range, then press a key reestablish the 
connection. If reconnection fails tap the 
Connect button on the BT status page.   

NOTE: It may take a couple of seconds for the 
connection to be reestablished after a key 
press.