I/O Magic 16X Manuale Utente
4
Rear Panel
4. Audio
output
This is a connector for output of analog
audio.
audio.
Pin 1 = Left channel
Pin 2 = Ground
Pin 3 = Ground
Pin 4 = Right channel
5. Device
configuration
jumper
This is the jumper switch for selection of
the drive use mode and supporting PC. The
jumper goes on both pins vertically.
the drive use mode and supporting PC. The
jumper goes on both pins vertically.
MA = Master
SL = Slave
CS = CSEL of
IDE interface.
IDE interface.
Reserved = Do
not use.
not use.
6. Host IDE interface
This is a 40-pin I/O connector according to
the ATA specifications.
7. DC
input
This is the power supply input.