Hunter Engineering Quick Check System Foglio Delle Specifiche
SPECIFICATIONS
Site Specifications
Power Requirements
Quick Check Console Supplied
Air Supply Req. (IS Units)
90-150 PSI (6.2-10.3 bar)
Min. Concrete Spec.
3 in. (76 mm) thick,
3000 PSI (20,700kPA) rating
Min. Grout Spec.
.2 in. (5 mm) thick below plates
Max. Longitudinal Slope
.25 in. per foot (6.4 mm per meter)
Max. Lateral Slope
.0625 in. per foot (1.6 mm per meter)
Product Specifications
Max. Wheel Weight
3500 lb. (1588 kg) per wheel
Brake Test Entry Speed
4 to 8 mph (7-13 km/h)
Maximum Wheel Base
165 in. (16764 mm)
Minumum Wheel Base
91 in. (9246 mm)
MODEL FEATURES / DIMENSIONS
Continued on Page 2
For inspection information visit:
www.hunter.com/inspection
For local contact visit:
www.hunter.com/company/findrep.cfm
For general inquiries visit:
www.hunter.com
or call
800 448-6848
Because of continuting technological advancements, specifications,
models, and options are subject to change without notice.
B424-01-PNT & B424IS-01-PNT
Brake Tester
B424IS-01-PNT
Brake Tester Dimensions
Backout Plates Length (
L
)
260 in.
6604 mm
Surface Plates Length (
L1
)
276 in.
7010 mm
Width (
W
)
87 in.
2210 mm
Inside Width (
W1
)
39 in.
991 mm
Plates w/ Inflation Station (
W2
)
94 in.
2388 mm
Runway Width (
R
)
24 in.
610 mm
Depth (
D
)
2 in.
51 mm
Form 6667-T, 06-13
Copyright © 2013, Hunter Engineering Company
R
W
W1
D
W2
L L1
W1