HydroSurge 400A-60 Manuale Utente

 - Indicates a situation which, if not avoided, will result in serious

injury or death.  This signal word is limited to the most extreme situations.

 - Indicates a situation which, if not avoided, could result in

serious injury or death.

 - Indicates a situation which, if not avoided, can result in damage

to the machine.

ALWAYS LOWER THE DRUM HOLDER TO LOWEST POSITION BEFORE TRANSPORTING.  The unit

can become unstable when transporting with a raised load.

KEEP WELL CLEAR OF POWER LINES.  Never approach a power line.  Current in a high voltage line may

arc some distance from the wire to the steel framed, grounded machine.

The Hydra-Lift Karrier is designed to handle one drum of the types listed at the top of page 3, under 2.

Machine Description.  DO NOT attempt to handle any other type of drum or object.  DO NOT exceed the

weight capacity of 800 Lb.

 - Level Floors Only

For operation only on clean, level floors of suitable bearing capacity. Do not use on sloped surfaces, ramps,

irregular or debris strewn floors.

Under no circumstances should any modifications be made to the Morse machinery without factory authorization.

Any modifications may void the warranty.  This machine was designed to perform a specific job and alterations

may result in injury to operator or machine.

Wear close-fitting clothing and safety equipment appropriate to the job.  Loose fitting clothing may become

caught on the machinery and cause severe personal injury.

Escaping hydraulic fluid under pressure can penetrate the skin, causing serious injury.  Avoid the hazard by

relieving pressure before disconnecting hydraulic lines.  Keep hands and body away from pinholes and

nozzles, which eject fluid under high pressure.  Use a piece of cardboard to search for leaks. If an accident

occurs, see a doctor immediately and inform them of the nature of the accident.

Wear safety shoes with non-slip soles and hard toe protection.

Copyright 2007  -  Morse Mfg. Co., Inc.

Form PL400-60 (0604-____)    (Updated 10/2007)

Page 2