Hunter Engineering Model PE Foglio Delle Specifiche
SPECIFICATIONS
P441 and P444 Alignment Pit System
Pit Rack
Site Specifications
Pit Construction
Refer to Forms 6120-T (P441) or 6121-T (P444)
Minimum Concrete Spec.
6 in. (152 mm) thick, 3000 PSI (20700 kPA) rating
Pre-Installation Kit
Required before pouring pit.
Pit Contractor Pre-Pack
None Available
Pit Edging
Field Fabricated / Purchased
Product Specification
Max. Vehicle Gross Weight
18,000 lbs. (8165 kg)
Jack Rail
Integrated Rails on Runways
Track Width
(inside and outside width)
Fixed Runway, Typical Spacing
40 - 85 inches (1016 - 2159 mm)
Pit Depth
Standard New Pit: 36 inches (914 mm)
Optional New Pit: 30 inches (762 mm)
Available for Existing Pit: 24 inches (610 mm)
P444 Pit Installation
Form 6944-T, 03-15a
Copyright © 2015, Hunter Engineering Company
For lift rack information visit:
www.hunter.com/rack
For local contact visit:
www.hunter.com/company/findrep.cfm
For general inquiries visit:
www.hunter.com
or call
800-448-6848
MODEL COMPARISON
Continued on Page 2
P444 Pit Illustration
CENTER PIT
SECTION
FIXED
RUNWAYS
Features
PT
PF
RKHD
PE
P44x
Capacity
Heavy Duty
18,000 lbs. / axle
(8165 kg)
Heavy Duty
18,000 lbs. / axle
(8165 kg)
Heavy Duty
20,000 lbs. / axle
(9072 kg)
Meduim Duty
10,000 lbs. / axle
(4535 kg)
Light Duty
18,000 lbs. Total
(8165 kg)
Axle Jack Rail
optional
T-Pit
optional
jack tray
N/A
Work Beam
N/A
N/A
N/A
Pit Depth
58 in.
(1473 mm)
58 in.
(1473 mm)
24 or 30 in.
(610 mm or 762 mm)
36 in.
(914 mm)
36 in.
(30 & 24 in. available)
(914, 762 or 610 mm)
Track Width
(inside - outside width)
Adjustable Runways
48 in. - 120 in
(1219 mm - 3048 mm)
Adjustable Runways
48 in. - 120 in
(1219 mm - 3048 mm)
Fixed Runways
40 in. - 106 in.
(1016 mm - 2692 mm)
Adjustable Runways
48 in. - 120 in
(1219 mm - 3048 mm)
Fixed Runways
40 in. - 85 in.
(1016 mm - 2159 mm)
OPTIONAL FIA
COMPONENTS:
• FIA Console
(console on
pit wall is also
acceptable)
• Inflation
Stations
• PowerSlide
Slip Plates