HPP Enterprises HP ELITEBOOK NOTEBOOK 2530P Manuale Utente

LED board (includes cable and Mylar cover)

499209-001

Before removing the LED board, follow these steps:

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect all external devices connected to the computer.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.

Remove the battery (see 

Remove the following components:

Primary hard drive (see 

)

Optical drive (see 

) or Secondary hard drive (see 

)

Switch cover (see 

Remove the LED board:

Peel the LED board away from the switch cover to remove it.

The LED board cable is included with the LED board and is also available in the Cables Kit,

spare part number 492555-001.

Reverse the above procedure to install the LED board.

66

Chapter 4   Removal and replacement procedures