HP MR4000N Manuale Utente

Setup    

 

• 

Use YPbPr when you use the component connectors to a TV, monitor, or other video component 
input. This is compatible with resolution settings 1080i, 720p, and 480p. 

• 

Use DVI when you use the DVI connector to a TV, monitor, or other video component input. This is 
compatible with resolution settings 1080i, 720p, and 480p. 

DVI/RGB Out 
Use to connect a DVI input on an HDTV or monitor. Use a VGA-to-DVI adapter (not included) to 
connect a VGA monitor. 

NOTE: Not all monitors with a DVI input are compatible. 

Where you connect your component into the connectors depends on the type of component and 
cables you are using. Your HDTV Tuner is compatible with composite, component, DVI-D, or VGA 
cables. Use the following chart to determine your component type: 

One three headed cable: 

• 

One yellow for video 

• 

One red for audio 

• 

One white for audio 

• 

Insert the yellow cable into the 
yellow Video connector in the 
Monitor Out section. 

• 

Insert the white and red cables into 
the white and red (L and R) audio 
connectors in the Monitor Out 
section. 

Three or five headed cable: 

• 

One red for red video 

• 

One green for green video 

• 

One blue for blue video 

Some component cables come with white and 
red audio cables attached. 

• 

Insert the red cable into the red 
Y connector in the Component Out 
section. 

• 

Insert the green cable into the 
green Pb connector in the 
Component Out section. 

• 

Insert the blue cable into the blue 
Pr connector in the Component 
Out section. 

• 

Insert the white and red audio 
cables into the white and red 
(L and R) audio inputs in the 
Component Out section. 

One cable with 3 rows of 8 pins. 

Insert the cable into the 
DVI/RGB Out. 

One cable with 3 rows of 5 pins. 

Insert the cable into the DVI/RGB Out 
connector. VGA-to-DVI adapter (not 
included) is necessary.