HP Tool Storage 354903-001 Manuale Utente

To remove the component: 

1.  Determine if the controller configuration supports hot-plug cache 

replacement: 

− 

If the storage system is equipped with a single controller, power down 
the storage system (on page 

− 

If the system has redundant controllers and the replacement cache is a 
different capacity than the failed cache, power down the storage system 
(on page 

− 

If the system has redundant controllers and the replacement cache is the 
same capacity as the failed cache, proceed with step 2. 

2.  Remove the controller ("Modular Smart Array 500 Generation 2 Controller" 

3.  Remove the existing cache module. 

 

4.  Repeat steps 2 and 3 if the storage system has redundant controllers and the 

replacement cache is a different capacity than the failed cache. 

To replace the cache module: 

1.  Install the module in the slot.