HP Tool Storage 354903-001 Manuale Utente

3.  Remove the power button/LED assembly. 

 

To replace the component, slide the power button/LED assembly into the bay 
until it locks into place. 

 

If the backplane board fails or the chassis sustains significant damage, you must 
order a replacement chassis. 

To replace the chassis and backplane: 

1.  Power down the storage system (on page 

2.  Remove all hard drive blanks ("Hard Drive Blank" on page 

3.  Remove all hot-plug SCSI hard drives ("Hot-Plug SCSI Hard Drive" on page 

4.  Remove the bezel blank ("Bezel Blank" on page 

5.  Remove the controllers ("Modular Smart Array 500 Generation 2 Controller" 

6.  Remove all hot-plug power supplies ("Hot-Plug Power Supply" on page 

7.  Remove the 2-Port or 4-Port Shared Storage Module ("2-Port or 4-Port 

Shared Storage Module" on page