HP FIBRE CHANNEL TO SCSI ROUTER M8201R Manuale Utente

Getting Started

M8201R Fibre Channel to SCSI Router Installation and User’s Guide — 529971-005

Mounting the Fibre Channel to SCSI Router on a

Desktop

To mount the Fibre Channel to SCSI router on a desktop:

1. Remove the Fibre Channel to SCSI router from the protective bag.

2. Attach the stick-on feet to the bottom of the unit.

3. Place the Fibre Channel to SCSI router on the table or desktop.

Two methods are available to install the Fibre Channel to SCSI router in a rack, one 
method using ear brackets and the other using rails. Before beginning installation, 
review the installation procedures appropriate for the mounting materials included in 
the shipping container of the product you received. When familiar with the installation 
procedure, follow the steps indicated to mount the Fibre Channel to SCSI router into a 
19-inch rack using these provided mounting materials:

•

One Fibre Channel to SCSI router

•

Two ear brackets (or two slides rails with two extension brackets)

•

A bag of mounting screws (eight #M6x12 Phillips screws and four #6-32x.312 
Phillips screws)

Phillips screwdriver (#2 size)

1. Remove the Fibre Channel to SCSI router from the protective bag.

2. Determine where the Fibre Channel to SCSI router should be mounted.

3. Remove any blanking panels and other equipment from the chosen rack location.

Note. To ensure proper airflow, place the Fibre Channel to SCSI router so the intake and 
exhaust vents remain clear of obstructions.