HP FIBRE CHANNEL TO SCSI ROUTER M8201R Manuale Utente

Using the Serial Interface

M8201R Fibre Channel to SCSI Router Installation and User’s Guide — 529971-005

Ethernet Configuration

This option allows for setting up all Ethernet network settings, including IP address, 
Subnet mask, IP gateway, SNMP and security settings, Ethernet mode, physical 
address, and host name.

•

Select 1 to change the IP address of the Fibre Channel to SCSI router. The default 
for this setting is 192.231.36.101.

•

Select 2 to change the IP subnet mask for the Fibre Channel to SCSI router. The 
default for this setting is 255.255.255.0.

•

Select 3 to change the IP gateway for the Ethernet network of the Fibre Channel to 
SCSI router.

•

Select 4 to change the Ethernet physical address, or MAC address, of the Fibre 
Channel to SCSI router. Ethernet physical addresses are always assigned to 
Ethernet adapters by the manufacturers.

Ethernet Configuration Menu

X.XX.XX XXXXXX XXXXXX-XXX_XXXXXXXXXXXXXX

01/06/2003 08:56:22

IP Address                     : 192.231.36.101

Subnet Mask                    : 255.255.255.0

IP Gateway                     : 0.0.0.0

Ethernet Physical Address      : 08:06:07:05:03:09

Ethernet Mode                  : 10/100Mbps (Auto-Neg)

Hostname                       : 

DHCP Configuration             : Disabled

1) Change IP Address

2) Change IP Subnet Mask

3) Change IP Gateway

4) Change Ethernet Physical Address

5) Toggle Ethernet Mode

6) Change Hostname

7) Toggle DHCP Configuration

8) Change SNMP Settings

9) Change Security Settings

X) Return to previous menu