HP FIBRE CHANNEL TO SCSI ROUTER M8201R Manuale Utente

M8201R Fibre Channel to SCSI Router Installation and User’s Guide — 529971-005

This section includes the steps that are needed to configure OSM so that it can monitor 
the Fibre Channel to SCSI router. 

To configure OSM for monitoring the router complete these three basic steps:

1. Connect the router to the LAN connection on the system.

2. Configure the router's IP address, user name, and password.

3. Configure the router for OSM monitoring.

You need these components:

•

A M8201R Fibre Channel to SCSI router

•

A system console with a hyper terminal installed

•

A serial cable

•

A system console with a serial cable port

To connect the router to the LAN connection on the system, make these connections to 
the Fibre Channel to SCSI router:

1. Connect the router to the FCSA on the system by using a fiber-optic cable.

2. Connect the tape drive to the router by using a SCSI cable.

3. Connect a serial cable to the system, and then connect the other end of the cable 

to the serial port on the router.

Note. For more information on connecting the router and tape drive to the system, see 

Note. For more information on connecting the serial cable to the system, see