HP Blackbird 002-21A Gaming System Guida All'Installazione Rapida
![HP](https://files.manualsbrain.com/attachments/29005dca542c93ad59e01e223583dbd51961550d/common/fit/150/50/3931a36faa9f1af0627fe52b73d277ccf98e5d18c55433f253353db13ee5/brand_logo.jpeg)
16
Getting Started (features vary by model)
A stereo speaker set is a left-right, two-channel speaker system. A multichannel audio
speaker system has a left-right front and left-right rear channel, and it may include a
subwoofer and a center speaker. Side speakers are included in more advanced systems. A
subwoofer provides enhanced bass sounds.
speaker system has a left-right front and left-right rear channel, and it may include a
subwoofer and a center speaker. Side speakers are included in more advanced systems. A
subwoofer provides enhanced bass sounds.
“.1” indicates a subwoofer. For example, 7.1 channels refers to an eight-speaker mode
and uses two front speakers (left-right), two side speakers (left-right), two rear speakers
(left-right), a center speaker, and a subwoofer.
and uses two front speakers (left-right), two side speakers (left-right), two rear speakers
(left-right), a center speaker, and a subwoofer.
Connecting 2/2.1 (Two speakers and a
subwoofer) audio speakers
subwoofer) audio speakers
To connect simple left/right stereo active speakers or two speakers and a subwoofer for
two-channel (2.1 speaker) output:
two-channel (2.1 speaker) output:
1
Turn off the computer.
2
Connect the speaker cable to the lime green Audio Line Out connector that matches
the back of your computer.
the back of your computer.
3
Connect the cable to the audio system. For 2.1 speakers that were shipped with your
computer (select models only), connect the Audio Line Out connector to the subwoofer.
computer (select models only), connect the Audio Line Out connector to the subwoofer.
4
Connect the left and right speakers to the subwoofer. Refer to the speaker
documentation.
documentation.
5
Turn on the computer.
6
Plug in the speaker system power.
7
Turn on the speaker system.
Step 8 is optional for a two-speaker setup.
8
After the speakers are connected to the computer, configure the audio software for
sound output for your computer model. See “Connecting Speakers or Microphone.”
sound output for your computer model. See “Connecting Speakers or Microphone.”
NOTE:
Type 3 is three connectors.
Type 6 is six connectors.
Type S is sound card.
NOTE: Always turn on the computer before you turn on the speaker system.
3
6
S