HP STORAGEWORKS SSL1016 Manuale Utente

Autoloader Operation

91

View Firmware Version

To view the firmware version:

1. On the main menu, scroll to Status. (See 

.)

2. Press Enter.

3. On the Status submenu, scroll to Autoloader Info. (See 

.)

4. Press Enter.

5. On the autoloader Info submenu, scroll to Version. (See 

6. Press Enter.

A list of messages similar to the following screen appears.

Figure 65:  Autoloader version messages

Table 9:  Autoloader Version Messages

The number indicates the firmware version.

The number indicates the Error Detection Code that 
was generated when the firmware was installed. The 
autoloader uses this number to verify that the firmware 
and the memory holding the firmware are good.

The number indicates the hardware version.

The number indicates the mechanical version.