Hood J3250M Manuale Utente
Performing Diagnostics
Performing a Ping/Link Test
9
Performing Diagnostics
P
e
rf
or
min
g
Di
agn
agn
ost
ic
ic
s
Using HP Hub & Switch Management, you can help isolate faults by running
device self-tests, Link tests, and Ping tests (IP networks).
device self-tests, Link tests, and Ping tests (IP networks).
Note: For older HP devices that cannot be managed with a Web
browser, read the chapter “Management for Non-Browserable Devices”
or see the online help.
browser, read the chapter “Management for Non-Browserable Devices”
or see the online help.
This chapter includes information on:
Performing a Ping/Link Test
You can isolate faults by running Link tests or Ping tests (IP networks).
Select the Diagnostics tab and click on the Ping/Link Test button. Choose
a test for sending test packets to, or through, a device in order to verify the
path between two network devices. In the Destination MAC/IP Address
field enter the IP address or MAC address of the device for which you want
to test the connection. Specify the number of packets to send and the
timeout (in seconds) for each test. Click on the Start button to start the test.
Click on the Stop button to stop the test.
Select the Diagnostics tab and click on the Ping/Link Test button. Choose
a test for sending test packets to, or through, a device in order to verify the
path between two network devices. In the Destination MAC/IP Address
field enter the IP address or MAC address of the device for which you want
to test the connection. Specify the number of packets to send and the
timeout (in seconds) for each test. Click on the Start button to start the test.
Click on the Stop button to stop the test.
9-1