Honeywell VCR DCP200 Manuale Utente

DCP200 Profile Controller & Recorder - Product Manual

51-52-25-150, Issue 1 – April 2009

Configuration & Use

Page 63

This menu controls the starting and stopping of the Data Recorder and the deletion of 
previous recordings. Refer to the Recorder Configuration sub-menu in Configuration Mode 
for information about how to setup the data to be recorded and the recording interval.

See to the Data Recorder Option section for more details on the use of the recorder and it’s 
features.

Table 23. Recorder Menu Screens

 Recorder Menu:

Enter correct code number to access Data Recorder Menu.

Shown if a recording is in progress when the Recorder Menu is
entered. - Allows access to the Recording Start/Stop screen only, until 
the recording is stopped.

Manually Stop, or Start a new recording. – if Log Trigger is Recorder 
Menu Start/Stop.

Forces a recording to Stop, overriding the selected record trigger. – if 
Log Trigger is During Alarms; Digital Input A or B; or During Profile.

Shows if a recording is in progress; the recording mode; memory 
usage per sample; memory remaining and the recording time 
remaining. The time remaining is adjusted for any alarm or events that 
have already occurred, but cannot allow for future alarms or events.

Clears the recorder memory. 

Permanently removes All 

recorded data.

This is a read only mode describing the instrument and the options fitted to it.

Press 



to move forward or 



to move backwards through the displayed 

information.

Hold down 



and press 



to return to the Main Menu

Scrolling “Help Text” is shown at the bottom of the screens to aid navigation.