Hitachi 3300MFP Manuale Utente
160 12 Troubleshooting printing problems
EN
Improving print quality
This section provides information about identifying and correcting print defects.
Light print or fade
●
The toner supply is low. See
for more information.
●
The media might not meet Hewlett-Packard’s media specifications (for example, the media is
too moist or too rough). See
too moist or too rough). See
for more information. If the whole
page is light, the print density adjustment is too light or EconoMode might be turned on. Adjust
the print density and disable EconoMode in the printer properties. See
the print density and disable EconoMode in the printer properties. See
for more
information.
Toner specks
●
The media might not meet Hewlett-Packard’s media specifications (for example, the media is
too moist or too rough). See
too moist or too rough). See
for more information.
●
The printer might need to be cleaned. See
for instructions.
Dropouts
●
A single sheet of media might be defective. Try reprinting the job.
●
The media’s moisture content is uneven or the media has moist spots on its surface. Try
printing with new media. See
printing with new media. See
for more information.