Hitachi COMPAQ 8000 Manuale Utente
To replace the front bezel:
1.
Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1)
then rotate the top side of the bezel onto the chassis (2) and snap it into place.
then rotate the top side of the bezel onto the chassis (2) and snap it into place.
Figure 2-5
Replacing the Front Bezel
2.
Replace the access panel.
3.
If the computer was on a stand, replace the stand.
4.
Reconnect the power cord and turn on the computer.
5.
Lock any security devices that were disengaged when the access panel was removed.
12
Chapter 2 Hardware Upgrades
ENWW