Hitachi Microscope & Magnifier S-4800 Manuale Utente

2 - 23

(5)  Scan menu: The Scan menu includes commands for scanning control. 

 

• Run (Freeze) 

Runs or Freezes scanning alternately. 

• Capture 

Starts image capturing. 
Refer to <3.6.4 Image Capturing> 

• Capture Reso 

Selects capturing image resolution 

• Split DM Mode 

Activates Split/Dual Mag mode. 
Refer to <3.9.2 Split screen and Dual Mag mode> 

• Scan Speed 

Selects scanning speed. 
Refer to <3.5.3 Selecting Scanning Speed> 

• Arrange Speed buttons  Specifies scanning speed of each of 4 Scanning Speed buttons. 

Refer to <3.5.3 Selecting Scanning Speed> 

• Scan Size 

Selects the size of scanning image display (Screen mode) from 
Full, Dual and Small. 
Refer to ,3.9.1 Screen mode> 

 
(6)  Image menu: The Image menu includes commands for signal processing of optional 

detectors. 
 

• Opt. Signal Processing Opens 

the 

Opt Signal Processing dialog window. 

Refer to <3.9.5 Signal Processing> 

 
(7)  Analysis menu: The Analysis menu includes commands for analysis modes, measurement 

and others. 
 

• Normal 

Sets to Normal mode (image observation). 

• Line Analysis 

Selects Line analysis 1 and 2 mode alternately. 
Refer to <3.9.4 X-ray Analysis mode> 

• Spot Analysis 

Selects Spot 1 and 2 mode alternately. 
Refer to <3.9.4 X-ray Analysis mode> 

• Area Analysis 

Selects Area analysis 1 and 2 mode alternately. 
Refer to <3.9.4 X-ray Analysis mode> 

• Oblique 

Opens Oblique image window and displays birds-eye view of 
viewing images. 
Refer to <3.9.14 Oblique Image> 

• Measure 

If the CD-Measurement option is installed, the CD Measurement 
dialog window is brought up. If the option is not installed, 
measurement cursors appear on the image.