Harmar Mobility AL650 Manuale Utente

Parking the Chair on the Platform:  Before
loading the power chair, verify that the 
platform has been lowered all the way to the 
ground.  Set your chair’s speed control at a 
slow speed so that you may maneuver 
comfortably onto the platform.  You may drive
onto the platform from either side.  Park the 
chair such that it is centered on the platform.  

Securing the Chair to the Platform:  The
Pioneer platform has a restraint attached to 
each corner of the platform.  Each restraint
has a hook at the end.  Place each hook in 
either the anchor plate slot, or in each U-bolt.
Pull the loose end of each restraint tight.
To release, simply press the release tab, and
remove the hooks.

Folding Seat Backs:  If your chair has a 
folding seat back you may wish to fold it to the 
down position.  This will allow you more 
clearance when loading the chair into the 
vehicle.  Depending on the size of your chair, 
you may need to remove the head rest to 
provide for sufficient clearance.

Raising the Chair: Before raising, verify that 
the chair is secured to 

the platform.  While 

holding the hand control stand to the side and 
away from the lift.  Press the up button.  The 
lift will rai se and retract into the vehicle.  The 
lift is retracted fully when the platform is fully 
inside of the vehicle and the lift’s motion stops.  
At this point release the button.  Secure the 
hand control by placing it on the hook and loop 
patch attached to the lift.  Close the rear door 
carefully taking notice of any baskets, 
backpacks or additional items attached to the 
chair that may be hit by the door.

PULL to
TIGHTEN

PUSH to
RELEASE

10