Handspring Treo 300 Manuale Utente
Section 1
4
Introduction to Your PCS Phone Handspring
®
Treo™ 300
7.
If any data for your third party applications did not transfer, beam it
from your old handheld to your PCS Treo 300.
from your old handheld to your PCS Treo 300.
8.
If you created a password on your old handheld, enter it on your PCS
Treo 300.
Treo 300.
Note:
Records you previously marked Private remain marked Private, but
you need to reenter a password on your PCS Treo 300.
9.
If you had any important settings on your old handheld, such as
Network Preferences, manually copy them from your old handheld
to your PCS Treo 300.
Network Preferences, manually copy them from your old handheld
to your PCS Treo 300.
Each device must have a unique name
After you complete the upgrade process described above, you have two
devices with the same name. This is an undesirable situation. Each
device must have a unique name in order to prevent unexpected results
during HotSync operations and other complications.
devices with the same name. This is an undesirable situation. Each
device must have a unique name in order to prevent unexpected results
during HotSync operations and other complications.
We strongly recommend that you perform a hard reset on your old
handheld. See page 235 for details.
handheld. See page 235 for details.
A hard reset not only erases all data from the old handheld; it also erases
the name and makes that handheld a clean slate, ready to receive a new
name. The next time you perform a HotSync operation with this old
handheld, you are asked to give it a name. Be sure to give it a unique
name.
the name and makes that handheld a clean slate, ready to receive a new
name. The next time you perform a HotSync operation with this old
handheld, you are asked to give it a name. Be sure to give it a unique
name.