GSI Outdoors AUTOFLOW 2TF Manuale Utente

2000 Autoflow

1. Read and understand the operating manual before trying to operate the

dryer.

2. Power supply should be OFF for service of electrical components. Use

CAUTION in checking voltage or other procedures requiring power to

be ON.

3. Check for gas leaks at all gas pipe connections. If any leaks are de-

tected, do not operate the dryer. Shut down and repair before further

operation.

4. Never attempt to operate the dryer by jumping or otherwise bypassing

any safety devices on the unit.

5. Set pressure regulator to avoid excessive gas pressure applied to burner

during ignition and when burner is in operation. Do not exceed maxi-

mum recommended drying temperature.

6. Keep the dryer clean. Do not allow fine material to accumulate in the

plenum or drying chamber.

7. Use CAUTION in working around high speed fans, gas burners, augers

and auxiliary conveyors which START AUTOMATICALLY.

8. Do not operate in any area where combustible material will be drawn into

the fan.

9. Before attempting to remove and reinstall any propellor, make certain to

read the recommended procedure listed within the servicing section of

the manual.

10. Clean grain is easier to dry. Fine material increases resistance to airflow

and requires removal of extra moisture.

Proper Use of Product

This product is intended for the use of drying small grains only.

Any other use is a misuse of the product!

This product has sharp edges! These sharp edges may cause serious

injury. To avoid injury handle sharp edges with caution and use proper

protective clothing and equipment at all times.

Guards are removed for illustrati on purposes only. All guards must be

in place before and during operation.

Use Caution in the

Operation of this

Equipment

The design and manufacture of this

dryer is directed toward operator

safety. However, the very nature of

a grain dryer having a gas burner,

high voltage electrical equipment

and high speed rotating parts, does

present a hazard to personnel, which

can not be completely safeguarded

against, without interfering with ef-

ficient operation and reasonable ac-

cess to components.

Use extreme caution in working

around high speed fans, gas-fired

heaters, augers and auxiliary con-

veyors, which may start without

warning when the dryer is operat-

ing on automatic control.

READ THESE INSTRUCTIONS

BEFORE OPERATION AND SERVICE

SAVE FOR FUTURE REFERENCE

Continued safe, dependable opera-

tion of automatic equipment de-

pends, to a great degree, upon the

owner. For a safe and dependable

drying system, follow the recom-

mendations within this manual, and

make it a practice to regularly in-

spect the operation of the unit for

any developing problems or unsafe

conditions.

Take special note of the safety pre-

cautions listed above before at-

tempting to operate the dryer.

KEEP THE DRYER CLEAN

DO NOT ALLOW FINE

MATERIAL TO ACCUMULATE

IN THE PLENUM CHAMBER

OR SURROUNDING THE

OUTSIDE OF THE DRYER

SAFETY PRECAUTIONS