Generac Power Systems ZUMO 665 Manuale Utente

Getting Started



This product contains a lithium-ion battery. 

To prevent damage or personal injury, 

remove the unit from the vehicle when 

exiting or store it out of direct sunlight.

Always keep the battery installed when the 

zūmo is on.

1.  Locate the lithium‑ion battery that came in 

the product box.

2.  Slide the release key until the battery 

cover on the back of the zūmo pops up. 

3.  Locate the metal contacts on the end of 

the lithium‑ion battery. 

4.  Insert the battery so that the metal 

contacts on the battery align with 

the metal contacts inside the battery 

compartment. 

5.  Replace the battery cover.

1.  Plug the automotive power cable into the 

power connector on the right side of the 

cradle. 

2.  Remove the clear plastic from the suction 

cup. Clean and dry your windshield and 

the suction cup with a lint‑free cloth. 

3.  Place the suction cup on the windshield. 
4.  Flip the lever back, toward the windshield. 
5.  Snap the cradle onto the suction cup arm.
6.  Fit the bottom of your zūmo into the 

cradle.

7.  Tilt the zūmo back until it snaps into 

place.

8.  Plug the other end of the automotive 

power cable into a power outlet in your 

car. 

For information on how to mount your zūmo 

on a motorcycle, see