GBC 930-028 Manuale Utente

6HFWLRQ   6DIHW\

Your safety, as well as the safety of others, is important 
to GBC Pro-Tech. This section contains important 
safety information. 

The following symbols are used throughout this man-
ual to indicate warnings and cautions.

The F-60+ Laminator has been designed with safety as 
a primary consideration. However, you must become 
thoroughly familiar with the controls, proper operation, 
proper service procedures, and safety features of the 
laminator before using or servicing the unit.

GBC Pro-Tech F-60+ Laminator is a powerful machine 
that is designed to mount, laminate and encapsulate. 
The forces required to accomplish these tasks can vary 
from negligible to very large.

In addition, the laminating roll of the F-60+ can reach 
temperatures of 270 

°

F (132 

°

C). At these temperatures 

there is a danger of a severe burn if the roll is touched 
during set-up, operation or servicing.

Safety is an important feature of the F-60+ Laminator. 
It has emergency stop buttons and a mechanical guard 
system on the infeed. In addition, the pull rolls are con-
tained in an enclosure to prevent injury.

The laminator is equipped with four emergency stop 
buttons located on the top front and back of either side 
of the laminator. Any of these, if engaged, stops the 
laminator. To continue operation all emergency stop 
buttons must be in the up position and you must press 
the reset button above the fuse panel on the back of the 
laminator (see Figure 1-2). The laminator is also 
equipped with a power lockout (see Figure 1-3) which 
stops power to the machine.

1/4 turn

Twist pressed

button to resume

operation - the

button pops up

Push either

button to stop the

laminator