Exabyte 1005911-003 Manuale Utente
March 2002
Page 11 of 12
7 Testing the library and resuming operation
11. Press [ENTER] and use the arrow keys to select SCSI mode. Press [ENTER]
again.
If the library does not operate correctly, check the following:
If you cannot solve the problem yourself, contact your service provider or
Exabyte Technical Support (1-800-445-7736 or 1-303-417-7792).
Exabyte Technical Support (1-800-445-7736 or 1-303-417-7792).
SCSI library
Fibre Channel library
#
Are the devices on each SCSI bus attached to
the library all LVD?
the library all LVD?
#
Are the SCSI buses terminated?
#
Are the SCSI cables firmly connected to the
library, tape drives, and host computer?
library, tape drives, and host computer?
#
Are the SCSI IDs unique for the devices on each
SCSI bus?
SCSI bus?
#
Is the library operating in the correct control
mode? (For most applications, the control
mode should be set to SCSI.)
mode? (For most applications, the control
mode should be set to SCSI.)
#
Are the GBICs and cables used to connect the
tape drives to the Fibre Channel loop
compatible?
tape drives to the Fibre Channel loop
compatible?
#
Are the Fibre Channel cables firmly connected
to the library, tape drives, and the Fibre Channel
hub or switch?
to the library, tape drives, and the Fibre Channel
hub or switch?
#
Is the library operating in the correct control
mode? (For most applications, the control
mode should be set to SCSI.)
mode? (For most applications, the control
mode should be set to SCSI.)