Epson PowerLite 1705c Manuale Utente

■

Check that the 

Power

 light is green, not flashing. 

■

The projector may be in standby or sleep mode. If the 

Power

 

light is orange, press the P

Power

 button to turn the projector 

on.

■

If the power was switched off and then on again, the projector 
may be cooling down. Wait until the 

Power

 light stops flashing 

and remains orange; then press the P

Power

 button again.

■

Press the 

A/V Mute 

button on the remote control to make sure 

the picture has not been turned off temporarily. 

■

Open the A/V Mute Slide, if it is closed. 

■

The attached computer may be in sleep mode or displaying a 
black screen saver. Try pressing a key on the computer.

■

If you are projecting from a DVD player or other video source, 
make sure you turn it on and press its 

Play

 button.

No Signal

■

Make sure the cables are connected correctly, as described on 
page 36.

■

Try restarting your computer.

■

If you’ve connected a computer and one or more video sources, 
you may need to press the 

Source Search 

button on the 

projector or one of the source buttons on the remote control to 
select the correct source. Allow a few seconds for the projector to 
sync up after pressing the button.