Emerson Liebert PSA Line-Interactive UPS 500-1500VA Manuale Utente

Using the Modem menu item, the System Administrator can set up Liebert MultiLink with the 

modem commands needed to send pager messages.
To enable Liebert MultiLink to use the modem:

• Click on Configure, then on Modem.

• In  the  Modem Configuration window that opens, place a check mark (✔) in the Modem 

Connected and Enabled box—this is required to use the modem.

• Select the proper Modem Serial Port from the drop-down list.
• Enter the required information.

a. If your telephone system requires dialing a particular digit, such as 9, to get an outside line, 

choose from the drop-down list in the External Line box or enter the number followed by a 

comma.

b. If the line used by the modem has the call-waiting feature, choose from the drop-down list in 

the Disable Call Waiting box or enter the required code followed by a comma.

c. Before Liebert MultiLink can find and utilize the modem, data must be entered in the 

Modem Control boxes. You may change the default values as needed.

d. At any time, click on the Reset to Defaults button to revert to the factory defaults for this 

feature.

e. Click OK to save the changes or click Cancel to close the window without saving.