Endura RADISYS KP915GV Manuale Utente

 

 

3

 

1.0 September 

2005 

• 

First Release 

2.0 December 

2005 

• 

Updates to clarify jumper default positioning, non-support 

for S/PDIF In and Out on board, BIOS update to P28 version, 
and editorial changes to some tables.  Added details to OEM 
Features section.  No functional changes.  

This manual uses the following conventions: 

• 

Screen text and syntax strings appear in this font. 

• 

All numbers are decimal unless otherwise stated. 

 

Notes indicate important information 
about the product. 

 

Tips indicate alternate techniques or 
procedures that you can use to save 
time or better understand the product. 

 

Cautions indicate potentially hazardous 
situations which, if not avoided, may result 
in minor or moderate injury or damage to 
data or hardware. It may also alert you 
about unsafe practices. 

 

The globe indicates a World Wide 
Web address. 

 

Warnings indicate potentially hazardous 
situations which, if not avoided, can result 
in death or serious injury. 

 

The book indicates a book or file. 

 

ESD cautions indicate situations that 
may

 cause damage to hardware via 

electro-static discharge (ESD). 

 

Danger indicates imminently hazardous 
situations which, if not avoided, will result 
in death or serious injury. 

 

When installing this motherboard into a suitable chassis, refer to the following notes: 

•  Read and save all instructions. 
• 

 

Always disconnect Cord/Plug before installation or upgrade. Parts of the motherboard can 

remain powered even when the power supply is switched off unless the cord is disconnected. 

•  Pay attention to the safety warnings included in this document. 

•  When installing expansion cards, pay attention to the maximum loads detailed in this 

document. Use only UL approved peripheral cards. 

•  Route wiring away from sharp edges, heat sources and cooling fans. 

•  Pay attention to the thermal issues described in this document. The motherboard requires 

suitable airflow to maintain an ambient temperature within its operating range.