Elo TouchSystems 5000 Manuale Utente

• Danger - Explosion hazard. Do not use in the presence of flammable anesthetics, and other 

flammable materials. 

• To prevent fire or shock hazards, do not immerse the unit in water or expose it to rain or 

moisture. 

• Do not use the unit with an extension cord receptacle or other outlets unless the prongs of the 

power cord can be fully inserted. 

• RISK OF ELECTRICAL SHOCK - DO NOT OPEN. To reduce the risk of electrical shock, 

DO NOT remove the back of the equipment or open the enclosure.  No user-serviceable parts 
are inside. Refer servicing to qualified field service engineers only. 

• Uninsulated voltage within the unit may have sufficient magnitude to cause electrical shock. 

Avoid contact with any part inside the unit. 

• Power cord is used as a disconnection device. To de-energize equipment, disconnect the 

power cord. 

• This unit must follow the national requirement, and local state laws to dispose unit. 
• Before connecting the cables to your Elo touchmonitor, make sure all components are 

powered OFF. 

• The use of ACCESSORY equipment not complying with the equivalent safety requirements 

of this equipment may lead to a reduced safety of the resulting system. Consideration 
relating to the choices of accessory equipment should include: 

• Use of accessory in the patient vicinity. 
• Evidence that the safety certification of the accessory has been performed in accordance 

to the appropriate IEC 60601-1 and/or IEC 60601-1-1 harmonized national standard. 

•  For continued safety ­

- This unit only complies to the above standards if used with a medical grade power cord.
-A medical grade power supply, such as the one specified, is required for use in a medical 
application. 

Note: 
• This symbol alerts the user to important information concerning the operation and 

maintenance of this unit, which should be read carefully to avoid problems. 

• This symbol means DC Current. 
• This symbol means ON/OFF stand-by switch. 

iv