Eicon Networks V8.3 Manuale Utente

After you have installed your Diva Server adapter as described in the printed 
installation guide that came with your adapter or that you downloaded from the Eicon 
Web site, start your computer.

Note:  You must log on with administrator rights to install Diva Server for Windows.

Windows detects the Diva Server adapter.

The ‘Found New Hardware Wizard’ is displayed. Click ‘Finish’ to complete the process.

The standard Windows Server 2003 drivers for your Diva Server adapter are installed. To 
be able to use all features of Diva Server for Windows, you must update the drivers with 
the software that is provided on your Diva Server Software Suite CD-ROM or that you 
downloaded from the Eicon Networks Web site. To update the drivers, follow the 
instructions below.

Note:  Assign the MSNs, extension range, phone numbers, or SPIDs later on in the Diva 
Server Configuration Manager after you installed the Diva Server for Windows software. 

Note:  If multiple adapters are installed, the wizard will be visible only once for each update 
or configuration of the software. The configured parameters correspond to all adapters.

From the Windows task bar, click ‘Start > Run’.

Type the path to the update file:

• Insert your Diva Server CD-ROM into the CD-ROM drive and enter the following 

path: 

D:\DRIVER\i386\ENGLISH\SETUP.EXE

(where D: is your CD-ROM drive letter)

• Or enter the path to the update file on the hard disk, e.g.

C:\Temp\ISDN

(where C: is the hard disk drive letter)

In the welcome dialog box, click ‘Next’ to start updating the drivers for all installed Diva 
Server adapters.

If you installed an adapter that is not supported with this software version, the 
‘Unsupported Adapter’ box appears. Download the drivers for the unsupported 
adapters and continue with the installation of the supported adapters. For supported 
adapters see 

 on page 14. This software version only supports 

the adapters listed there.