EE Brightbox Manuale Utente
EE Bright Box User Manual
46
be ‘PPPoA’ and on EE Fibre broadband the value will be
‘PPPoE’
Alternative values of ‘DHCP’, ‘Fix’ or ‘Bridge’ may be
displayed if alternative ADSL or Ethernet connection
modes have been configured in the Basic Set-Up >
Broadband Settings or Advanced Set-Up >
Broadband Settings pages.
‘PPPoE’
Alternative values of ‘DHCP’, ‘Fix’ or ‘Bridge’ may be
displayed if alternative ADSL or Ethernet connection
modes have been configured in the Basic Set-Up >
Broadband Settings or Advanced Set-Up >
Broadband Settings pages.
VPI/VCI
This field displays the ATM Virtual Path Identifier (VPI) and
Virtual Channel Identifier (VCI) for the active Internet
connection. For EE ADSL broadband the default value is
‘0/38’.
If the value is not ‘0/38’, then it may not be possible to
gain an Internet connection. These values can be
configured on the Basic Set-Up > Broadband
Settings or Advanced Set-Up > Broadband
Settings pages.
This setting will not be visible for EE Fibre broadband
customers.
Virtual Channel Identifier (VCI) for the active Internet
connection. For EE ADSL broadband the default value is
‘0/38’.
If the value is not ‘0/38’, then it may not be possible to
gain an Internet connection. These values can be
configured on the Basic Set-Up > Broadband
Settings or Advanced Set-Up > Broadband
Settings pages.
This setting will not be visible for EE Fibre broadband
customers.
Encapsulation
This field displays the ATM Encapsulation setting for the
active Internet connection. For EE ADSL broadband the
default value is ‘VC MUX’.
An alternative value of ‘LLC’ may be displayed if this has
been configured on the Basic Set-Up > Broadband
Settings or Advanced Set-Up > Broadband
Settings pages. Please note that it may not be possible
to gain an Internet connection in ‘LLC’ mode.
This setting will not be visible for EE Fibre broadband
customers.
active Internet connection. For EE ADSL broadband the
default value is ‘VC MUX’.
An alternative value of ‘LLC’ may be displayed if this has
been configured on the Basic Set-Up > Broadband
Settings or Advanced Set-Up > Broadband
Settings pages. Please note that it may not be possible
to gain an Internet connection in ‘LLC’ mode.
This setting will not be visible for EE Fibre broadband
customers.
ADSL Mode
This field displays the ADSL Standard for the active
Internet connection. For EE Broadband, the value will
likely display either G992.1(G.DMT) or G992.5(ADSL2+)
but G992.3 (ADSL2), G993.3- Annex M and G992.5 –
Annex M may also be displayed.
This value is automatically negotiated between the router
and the broadband exchange when establishing an
Internet connection, and cannot be configured in the
admin pages.
If the value of this field is ‘—‘ then a connection through
to the Internet has not been successfully established. Also
see
Internet connection. For EE Broadband, the value will
likely display either G992.1(G.DMT) or G992.5(ADSL2+)
but G992.3 (ADSL2), G993.3- Annex M and G992.5 –
Annex M may also be displayed.
This value is automatically negotiated between the router
and the broadband exchange when establishing an
Internet connection, and cannot be configured in the
admin pages.
If the value of this field is ‘—‘ then a connection through
to the Internet has not been successfully established. Also
see
chapter 8: troubleshooting
on page 198
This setting will not be visible for EE Fibre broadband
customers.
customers.
Subnet Mask
This field displays the Subnet mask for the active Internet
connection. This value is automatically assigned by EE
Broadband when you establish an Internet connection, but
will generally be ‘255.255.255.255’.
The value can also be configured on the Basic Set-Up >
Broadband Settings or Advanced Set-Up >
Broadband Settings for Internet connections with a
static IP addresses.
If the value of this field is ‘0.0.0.0’ then a connection
through to the Internet has not been successfully
established. Also see
connection. This value is automatically assigned by EE
Broadband when you establish an Internet connection, but
will generally be ‘255.255.255.255’.
The value can also be configured on the Basic Set-Up >
Broadband Settings or Advanced Set-Up >
Broadband Settings for Internet connections with a
static IP addresses.
If the value of this field is ‘0.0.0.0’ then a connection
through to the Internet has not been successfully
established. Also see
chapter 8: troubleshooting
on page
198