Edirol R-09HR Manuale Utente

 

Recording

 

Set the [PLUG-IN POWER Switch] to the type of microphone connected to the [MIC 
Input Jack].

 

• When connecting a dynamic microphone or a battery-powered microphone, be sure to use the 

[PLUG-IN POWER Switch] to set to off. Damage may result if the wrong setting is used.

• If a cable is connected to the [LINE IN Jack], then no sound is input through the [MIC Input Jack].

 

The durable dynamic microphone is suitable for vocal or instrumental recordings. It does not 
require a power supply.

 

The sensitive condenser microphone is suitable for recording quiet sounds such as live instrumentals 
or meetings. It requires a power supply from either batteries or plug-in power.

Only the L channel is recorded if a monaural microphone is used when the external microphone 
type is set to stereo. When set to monaural, the same sound (stereo) is recorded to the L and R 
channels.

 

Connect a microphone to the [MIC Input Jack] on the R-09HR.

 

To monitor the sound while recording, connect headphones to the [HEADPHONE jack]. Feedback 
may occur when external speakers are connected, so please do not use speakers.

 

Adjust the volume for the recorded sound.
Follow the procedures in “Adjusting recording levels” (p. 45) to adjust the level.

 

Switch OFF the [PLUG-IN POWER Switch] on the back.

 

Switch ON the [PLUG-IN POWER Switch] on the back. 

 

 

R-09HR_e.book 43 ページ ２００７年１２月１７日　月曜日　午後２時１６分