Eclipse Combustion EGA4 Manuale Utente

 
 
 

Instruction Manual MM850481 ed.01 

 
The “S” symbol below the first digit is the cursor.  
You can move the cursor between the digit using the [W] and [X] keys.  
You can change the selected digit using [S] and [T]. If “9” or “0” values are exceeded, the left digit is increased or 
decrease. 
Press [ENTER] to memory store the value and return to the previous page.  
Press [ESCAPE] (F1) to return to the previous page without save the changes. 

If you have to set a text parameter (e.g. customer name, etc.) use the following procedure:  
Select the parameter to be changed (e.g. customer name) with the [S] and [T] key from the configuring menu. 
Press [ENTER] to enter in modify page as follows: 
 

 

!"#$%&'()*+,-./0123

456789:;<=>?@ABCDEFG

HIJKLMNOPQRSTUVWXYZ

CONFIRM

ESCAPE

–

C

 

 
A “S” symbol below the “ “ (blank) character in figure, represent the cursor. It is used to identify the selected character; 
you can move it using the [W], [X], [S] and [T] keys.  The box below the characters table shows the currently inserted 
text. The symbol “W” is the end of line symbol. 
Press [CONFIRM] to write in the line box the selected char. The reversed char “

”, when selected, delete the last 

inserted char. 
Press [ENTER] to memory store the text and return to the previous page.  
Press [ESCAPE] to return to the previous page without save the changes. 

If you have to set a text parameter (e.g. Tag name, fuel type, etc.) use the following procedure:  
Select the parameter to be changed (e.g. fuel type) with the [S] and [T] key from the configuring menu. 
Press [ENTER] to enter in modify page as follows: 
 

-- Fuel --

Natural Gas
LPG
Gasoil
Combustible oil

ESCAPE

–

 

 
The “X” symbol on the left is the cursor.  
You can move the cursor between the digit using the [S] and [T] keys.  
Press [ENTER] to memory store the selection and return to the previous page.  
Press [ESCAPE] (F1) to return to the previous page without save the changes. 

20