Eclipse Combustion EGA4 Manuale Utente
Instruction Manual MM850481 ed.01
Alarms
You can enable, disable, and program up to 4 different acoustic and visible alarms for
critical measurements.
Aux Inputs
Not available for software version 1.001
Analog Output
Not available for software version 1.001
Timer
You can change the autozero time and the leak decay time.
Fuels
Up to 10 different fuels coefficient tables can be programmed.
Bar graphs
You can set up to 6 different bargraph (parameter and range).
Service
3 services information lines can be programmed for factory co-ordinates. (We suggest to
have Eclipse telephone and fax numbers).
8.5.2
GasConfig Installation
Software runs on IBM PC under WINDOWS 95/98/NT operative systems. Minimum requirements are a Pentium CPU
with 16Mbyte Ram and 8 Mbytes on hard disk, a color monitor and a Microsoft mouse or a compatible one.
In order to install the Software for Windows, follow the below procedure:
• Place the Software disk in a CD-ROM drive;
with 16Mbyte Ram and 8 Mbytes on hard disk, a color monitor and a Microsoft mouse or a compatible one.
In order to install the Software for Windows, follow the below procedure:
• Place the Software disk in a CD-ROM drive;
• From the Windows Start Menu, select <RUN>;
• Enter the filename D:SETUP.EXE (substitute the letter D for the disk drive that contains Software disk)
• Enter the filename D:SETUP.EXE (substitute the letter D for the disk drive that contains Software disk)
• Follow the on screen instructions making sure to provide the correct path to your Software directory when prompted.
Once installed, the EGA4 Configuration Software icon will appear on your Windows screen and it will be possible to
boot it by clicking on the icon as usual.
Once installed, the EGA4 Configuration Software icon will appear on your Windows screen and it will be possible to
boot it by clicking on the icon as usual.
39