CyberPower Network Management Card Manuale Utente

3 

z 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

1) Serial Port

 provides a connection for communication between the UPS and the Network 

Management Card 

2) Reset Button is used to reset the settings. When the Reset Button is pushed for 3 seconds, 

all settings except for the IP address for Network Management Card will refresh to default 
values.    When the Reset Button is pushed for more than 3 seconds, all settings including the 
IP address for CyberPower Network Management Card will reset to default values. 

3) DC power input allows input of power from the AC adapter(for select UPS models only) into 

wall socket. The DC power input is only used when the Network Management card is 
connected to select UPS models that don’t supply power to the Network Management Card. 

4) MSG Indicator indicates the status of connection between UPS and the Network 

Management Card. This indicator light will flash when Network Management Card IS NOT 
connected to the UPS. 

5) PWR Indicator indicates the power is on or off.    It illuminates when the Network 

Management Card is powered ON. 

6) LINK Indicator indicates the status of network connection. It illuminates when the Network 

Management Card is connected to the network. 

7) 10M Ethernet connector 

Indicator Mode 

Condition 

Off 

The Network Management Card is connected to UPS 

MSG  

(Red) 

Flashing 

No connection between the Network Management Card and 

the UPS 

Off 

The Network Management Card Power Is Off 

PWR 

(Green) 

On 

The Network Management Card Power Is On 

Off 

The Network Management Card is disconnected to the 

Network 

LINK 

(Yellow) 

On 

The Network Management Card is connected to the Network