Crestron electronic Surround Sound Tuning Kit Manuale Utente

Professional Surround Sound Tuning Kit 

 

Crestron

Insert program material into your source component. Play a track from the disc. Use 
the Turn MultEQ On and Turn MultEQ Off buttons to demo the MultEQ

®

 XT 

filters. 

NOTE:  If the customer is present during the MultEQ

®

 Pro On/Off demo, have them 

sit or stand within the room area you measured earlier. If they are not positioned 
inside this area, it is less likely they will hear the full effect of the MultEQ

®

 XT 

filters. 

There are two options for changing the MultEQ

®

 XT filters: 

1.  Add more measurement positions or redo your measurements. Click the 

back arrow until you get back to the Measurement screen (refer to 
“Measurement” which starts on page 6). 

2. Calculate 

the 

®

 XT filters with a different target curve. Click the 

back arrow to go back to the Target Sound options screen (refer to “Target 
Sound Options” on page 10). 

Click the View Results button to view a graphical display of the frequency response 
correction for each channel. For each channel, the graphs on the left are without the 
MultEQ

®

 Pro correction applied, while the graphs on the right are with the MultEQ

®

 

Pro correction applied (refer to illustration below). 

 

NOTE:  Before the changes have been permanently saved, the “Sound Correction 
Results” window will show the word “DRAFT” in large letters. In the illustration 
above, the window is shown as it will appear after the changes have been 
permanently saved. 

•  Professional Surround Sound Tuning Kit