Funai NB530SLX Manuale Proprietario

(*) The unit can also be turned on by pressing these buttons.

• Place a disc when opening the disc tray.

• Press to open or close the disc tray.

• This indicator lights up in blue when a disc is in this 

unit.

• Receive signals from your remote control so that you 

can control the unit from a distance.

• Refer to “Front Panel Display” on page 10.

• Press to stop playback.

• Press to pause playback.

• Press to start or resume playback.

• This indicator lights up in red when the unit is active 

and turns off when the unit is in standby mode.

• Press to turn on the unit, or to turn the unit into the 

standby mode. (To completely shut down the unit, 
you must unplug the AC power cord)

• Insert an SD Memory Card and play back the 

contents in it.

• Connect to a standard AC outlet to supply power to 

this unit.

• Unplug this cord from the AC outlet to completely 

shut down the unit.

• Use to connect an AV receiver / amplifier, Dolby 

Digital / DTS decoder or other device with a digital 
audio optical / coaxial input jack with a digital audio 
optical or digital audio RCA cable.

• Use to connect a TV with component video inputs 

with an RCA component video cable.

• Use to connect a TV, an AV receiver or other device 

with an RCA video cable.

• Use to connect a TV, an AV receiver / amplifier or 

other device with an RCA audio cable.

• Use to connect a TV with an HDMI compatible port 

with an HDMI cable.

PLAY

POWER

PAUSE

STOP

DISC IN

SD card

OPEN/

CLOSE

Y

VIDEO
OUT

P

B

/C

B

P

R

/C

R

OPTICAL

AUDIO OUT

COAXIAL

HDMI OUT

L

R

DIGITAL OUT

PCM/BITSTREAM

COMPONENT

VIDEO OUT

• Do not touch the inner pins of the jacks on the rear 

panel. Electrostatic discharge may cause permanent 
damage to the unit.

• This unit does not have the RF modulator.

E5K40UD_EN.book  Page 7  Wednesday, December 24, 2008  11:15 AM