Corega CG-WLNCM4G Manuale Utente
32
Advanced Settings
3.4 Event Server
The camera allows you to have your captured images uploaded to a
FTP server, sent to assigned email addresses, or stored to your network
storage server. Here you can set up your preferred destinations step
by step.
Please note that only still images can be captured when those below
methods are used. To save videos, please use “Manual Record” button
on Live View page or NC Monitor software.
After you complete the necessary settings for FTP, emails, or network
storage servers, click [Test] to test if the configuration is correct. Once
the camera connects to the server successfully, click [Apply] to accept
the settings.
FTP server, sent to assigned email addresses, or stored to your network
storage server. Here you can set up your preferred destinations step
by step.
Please note that only still images can be captured when those below
methods are used. To save videos, please use “Manual Record” button
on Live View page or NC Monitor software.
After you complete the necessary settings for FTP, emails, or network
storage servers, click [Test] to test if the configuration is correct. Once
the camera connects to the server successfully, click [Apply] to accept
the settings.
3.4.1 FTP
To configure your FTP server for the camera, first enter the Host
Address, Port Number, User Name and Password of the target FTP
server.
Address, Port Number, User Name and Password of the target FTP
server.
• Directory Path: Select the destination folder on the FTP server that
you would like to upload files to.
• Passive Mode: Select [Enable] to enable passive mode if needed.
you would like to upload files to.
• Passive Mode: Select [Enable] to enable passive mode if needed.