Corega CG-WLNCM4G Manuale Utente
40
Advanced Settings
• Factory Reset: Click [Reset] to reset the camera back to factory
default settings
• System Reboot: Click [Reboot] to restart the camera. The camera
configurations will be retained after rebooting.
• Configuration: You can save your camera configurations as a
backup file on your computer. Click [Get the Backup File] to create a
backup file with all the current settings or click [Browse] to retrieve
a saved backup file and then click [Restore].
• Update Firmware: The current firmware version will be displayed
here. To upgrade the firmware for your camera, please click [Browse]
to select backup file to upgrade. Make sure to keep the camera
connected to a power outlet while upgrading the firmware. The
camera may be damaged if it is disconnected during this process.
default settings
• System Reboot: Click [Reboot] to restart the camera. The camera
configurations will be retained after rebooting.
• Configuration: You can save your camera configurations as a
backup file on your computer. Click [Get the Backup File] to create a
backup file with all the current settings or click [Browse] to retrieve
a saved backup file and then click [Restore].
• Update Firmware: The current firmware version will be displayed
here. To upgrade the firmware for your camera, please click [Browse]
to select backup file to upgrade. Make sure to keep the camera
connected to a power outlet while upgrading the firmware. The
camera may be damaged if it is disconnected during this process.
3.8 USB
The USB section provides information of the connected USB storage
devices.
devices.
• USB Dismount: Make sure to click [Dismount] before unplugging
the USB device. The button will turn light grey when the device is
dismounted successfully.
• USB Information: Here shows the total space and available space
the USB device. The button will turn light grey when the device is
dismounted successfully.
• USB Information: Here shows the total space and available space