Corega CG-WLNCM4G Manuale Utente
47
CG-WLNCM4G User Manual
4.2 Installation
Please refer to chapter 2.2 for software installation.
4.3 Launching the Program
On your computer, please go to “Start” --> “Programs” --> “corega” -->
“NCMonitor” to start the program. Please make sure your computer
screen’s resolution is at least 1024x768, otherwise the images shown
on the live view screen may be distorted.
“NCMonitor” to start the program. Please make sure your computer
screen’s resolution is at least 1024x768, otherwise the images shown
on the live view screen may be distorted.
4.4 Adding a New Camera
To add a new camera, please click “SETTING” button on the top left
side of the screen, and click [Add Camera]. The pop-up screen may
show the current connected camera(s); if not, click [Search] to look for
the new camera’s IP address or click [Input] tab to add the IP address
manually (default Port is 80). Click [Add Camera] to apply.
side of the screen, and click [Add Camera]. The pop-up screen may
show the current connected camera(s); if not, click [Search] to look for
the new camera’s IP address or click [Input] tab to add the IP address
manually (default Port is 80). Click [Add Camera] to apply.
You may have to enter the user name and password of the new
camera to complete the process. Once you click [OK], the newly added
camera to complete the process. Once you click [OK], the newly added