Force10 Networks S2410s Manuale Utente
206
DHCP Server Commands
default-router
default-router
This command specifies the default router list for a DHCP client. {
address1
,
address2
…
address8
} are valid IP addresses, each made up of four decimal bytes ranging from 0 to 255.
IP address 0.0.0.0 is invalid.
The
no
version of this command removes the default router list.
Syntax
default-router address1
[
address2....address8
]
no default-router
Default
None
Mode
DHCP Pool Config
dns-server
This command specifies the IP servers available to a DHCP client. Address parameters are
valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address
0.0.0.0 is invalid.
valid IP addresses; each made up of four decimal bytes ranging from 0 to 255. IP address
0.0.0.0 is invalid.
The
no
version of this command removes the DNS Server list.
Syntax
dns-server address1
[
address2....address8
]
no dns-server
Default
none
Mode
DHCP Pool Config
domain-name
This command specifies the domain name for a DHCP client. The domain specifies the
domain name string of the client.
domain name string of the client.
The
no
version of this command removes the domain name.
Syntax
domain-name domain
Default
none
Mode
DHCP Pool Config