Clicomm CWP-100 Manuale Utente

 

28

 

① 

Select “System Configuration”   “Network” from the CWP-100 embedded web page. 

② 

Select the appropriate IP configuration parameters that match your network environment from below. 

(a) Static IP  

A. Select “Static IP”. 

B. Input IP, gateway, subnet mask and DNS address.   

(b)  DHCP(Dynamic IP) or Cable modem 

A. Select “DHCP”. 

(c) ADSL  

A. Select “ADSL”. 

B.   Input ADSL ID and the password. 

③ 

After inputting the parameters, select “save and restart.” 

④ 

The CWP-100 will restart with the new parameters. 

 

You can configure miscellaneous network configuration parameters besides the CWP-100 IP network mode. 

 

The user can assign up to two DNS addresses. In this case, the 
DNS address that the user had assigned acts even when the 
DHCP server assigns a DNS address with the dynamic IP address 
(DHCP). 

 

automatic 

 

External Ethernet address assigned to the CWP-100. Do not 
change this parameter except for special cases. 

N/A 

Set the time server address that obtains current time information. 

time.kriss.re.kr

Set the local time that the CG is located. 

+09:00 

The user can change the password for accessing the system with 
HTTP, FTP protocol and phone lock function. 

0000