FieldServer FS-8704-14 Manuale Utente
FS-8704-14 EtherNet/IP Manual
Page 20 of 30
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
Step 4
Configure the Properties for the two Message Blocks by clicking on the “…” button:
Read Message Block:
Write Message Block:
Communication Tab for both Message Blocks:
Step 5
Download the program and set the PLC to Run Mode.
Remote FieldServer Tag Configured in the FieldServer (see example above)
Local PLC Tag configured in the PLC Tag List (see example above)
Local PLC Tag configured in the PLC Tag List (see example above)
Remote FieldServer Tag configured in the FieldServer (see example above)
Number of points transferred from FieldServer
to PLC regardless of Tag and Array Sizes
to PLC regardless of Tag and Array Sizes
Number of points transferred from PLC to FieldServer
regardless of Tag and Array Sizes
regardless of Tag and Array Sizes
EIP_Card is the name of the Ethernet ENBT Card in the
ControlLogix Rack.
“2” refers to the port number on the ENBT Card.
192.168.1.75 is the IP Address of the FieldServer.
ControlLogix Rack.
“2” refers to the port number on the ENBT Card.
192.168.1.75 is the IP Address of the FieldServer.
The Tag Tab requires no configuration.